Table of Contents
The copper flange is used in many industries to offer a stable and lasting joint in the piping system. We are one of the most eminent manufacturers, dealers, and suppliers of copper flanges in Saudi Arabia that specialize in providing quality products as per the international quality standards. We produce our copper flanges from the finest quality metals, and our products have stood the test of time in whichever conditions they are used in. We showcase a full line of flanges, including weld neck, slip-on, blind, and threaded in line with requirements ranging from the oil and gas, petrochemical, construction industries. The copper flanges that we offer understand the importance of precise engineering and the quality control that goes with it so you can be sure of leak-tight joints and excellent resistance to both corrosive and high temperature environments. Source your copper flange needs from us and benefit from nothing but exceptional quality our products, guaranteed dependability, and exceptional services right in the center of the kingdom of Saudi Arabia industrial zone.
Copper Flanges Manufacturer and Supplier in Saudi Arabia :- Distinctive Features
1. Durability and Strength: Basically copper flanges are so much popular due to its high strength and very high tension strength and therefore utilized for pressure and temperature applications.
2. Corrosion Resistance: Flanges that are made out of copper will not corrode and therefore the flanges will retain their form and usefulness in such environments.
3. Versatility: Some types of these copper flanges are the weld neck, the slip-on as well as the blind and the threaded…
4. Leak-Proof Connections: Copper flanges are specifically intended for providing efficient finishing and this is through secure mechanical means as this is important due to the fact that the efficiency of the entire piping system greatly relies on leak proofing of the connections.
5. Thermal Conductivity: The use of copper for these flanges is desirable because copper possess good thermal conductivity which will be useful in systems where heat transfer is conceivable.
6. Ease of Installation: Copper flanges possess this virtue of easy manipulation to fit into the desired place and at the same time easy to install, replace when necessary thereby saving on time and money.
7. Aesthetic Appeal: Exclusively apart from efficiency Copper flanges are capable of being aesthetic to the piping systems and this is an added advantage.
8. Compliance with Standards: Here in OI of Southern Copper, we have copper flanges which are manufactured to standard global quality hence making it suitable to be used in various industries.
Copper Flanges Manufacturer and Supplier in Saudi Arabia:- Types
There is diversified Copper flanges available in the marketplace classified according to their kind, requirements and uses in almost all industrial applications to offer special advantages and uniform performance characteristics in piping systems. They are distinguished as weld neck flanges, slip-on flanges and blind flanges where weld neck flanges are designed for high pressure systems due to the strong weld connection, slip-on flanges that are cited for their ease of installation and recommended for low pressure systems, while blind flanges is used to close the ends of pipelines or pressure vessel. Also threaded flanges can be anodized as nut and bolt joint so they are favorable for the systems where flanges are immovable and often need to be disassembled for maintenance.
Copper Weld Neck Flanges in Saudi Arabia
Copper weld neck flanges are well suited for use under pressure, giving solid joining ridge with their long tapered hub guaranteeing the passage of pressure in a proper manner. These flanges have been categorized as some of the best due to their increased durability not to mention the fact that they do not rust easily and therefore are suitable for use in rough conditions where the equipment is needed to go on for several years without any repairs.
Copper Slip on Flanges in Saudi Arabia
Copper slip-on flanges are another type of flanges which are preferred for most pipes since they are easy to install as it is evident from the name, since they slip over the pipe end. With the help of these flanges, one can achieve low-pressure piping systems which do not added extra costs to form an effective assembly with less frequency of maintenance and it also prevents corrosion.
Copper Threaded Flanges in Saudi Arabia
Copper threaded flanges occupy a good demand in all types of applications where easy assembly and disassembly characteristics are preferable because threaded flanges are a non-welded connection solution. These copper threaded flanges are versatile and stable in performance; they are used where demand for changes or repairs in the system is high because they are stable and efficient in all stations.
Copper Blind Flanges in Saudi Arabia
Copper blind flanges tightly fasten pipeline terminals and pressure vessel access ports, and the provision of a leak-proof system. Made of copper, which is a very sturdy material, it yields excellent corrosion characteristics when used in industries.
Copper Socket Weld Flanges in Saudi Arabia
Copper socket weld flanges can be used in piping systems since they give a strong and leak-proof joint. It covers a groove which engages over the pipe to allow for perfectly flat welding and therefore added strength. Used mostly in applications that are under pressure, these flanges can be used and are available in different industrial uses.
Copper Orifice Flanges in Saudi Arabia
Copper orifice flanges are special instruments that are employed to indicate or monitor the flow rate of fluids in pipes. They have drilled holes (orifice bores) and they are usually fitted with orifice plates for the purpose of controlling as well as measuring flow rates. These flanges are important in the industries that involve the control of the flow rate of the commodity such as in the production of oil and gas, processing of chemicals and in the water treatment plants.
Copper Flanges Manufacturer and Supplier in Saudi Arabia :- Size Table
It mainly attempts to convey data on actual size and standard specification on flanges for copper pipes and therefore help the user determine suitability of the particular flanges in relation to use with specific copper pipes. In general, presented in the format of the tables that are grouped with reference to type and dimensions of the flange, these tables include the data about some values such as outer diameter, distance between bolts, and flange’s thickness. Design engineers and installers use this information in the construction of the system so that there are no misalignments and so as to optimize the output from the system. Size tables also help in correct ordering and stocking and help industries to carry out their functions properly and fulfill the needs of the projects. Thus, the stakeholders can be reassured regarding copper flanges varying in size in different industries and their installation and subsequent management.
| Nominal Size | Outside Diameter | Min. Thickness | RF Dia. | No. of Bolt Holes | Diameter of Holes | Bolt Circle | SO Bore ID | WN Bore ID | Dia. Hub Base | Dia. of Hub Top | SO LTH | WN LTH |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| (OD) | (T) | (R) | (BC) | (SB) | (WB) | (HB) | (HT) | (SL) | (WL) | |||
| 1⁄2 | 3.5 | 0.38 | 1.38 | 4 | 0.62 | 2.38 | 0.88 | 0.62 | 1.19 | 0.84 | 0.56 | 1.81 |
| 3⁄4 | 3.88 | 0.44 | 1.69 | 4 | 0.62 | 2.75 | 1.09 | 0.82 | 1.5 | 1.05 | 0.56 | 2 |
| 1 | 4.25 | 0.5 | 2 | 4 | 0.62 | 3.12 | 1.36 | 1.05 | 1.94 | 1.32 | 0.62 | 2.12 |
| 11⁄4 | 4.62 | 0.56 | 2.5 | 4 | 0.62 | 3.5 | 1.7 | 1.38 | 2.31 | 1.66 | 0.75 | 2.19 |
| 11⁄2 | 5 | 0.62 | 2.88 | 4 | 0.62 | 3.88 | 1.95 | 1.61 | 2.56 | 1.9 | 0.81 | 2.38 |
| 2 | 6 | 0.69 | 3.62 | 4 | 0.75 | 4.75 | 2.44 | 2.07 | 3.06 | 2.38 | 0.94 | 2.44 |
| 21⁄2 | 7 | 0.81 | 4.12 | 4 | 0.75 | 5.5 | 2.94 | 2.47 | 3.56 | 2.88 | 1.06 | 2.69 |
| 3 | 7.5 | 0.88 | 5 | 4 | 0.75 | 6 | 3.57 | 3.07 | 4.25 | 3.5 | 1.12 | 2.69 |
| 31⁄2 | 8.5 | 0.88 | 5.5 | 8 | 0.75 | 7 | 4.07 | 3.55 | 4.81 | 4 | 1.19 | 2.75 |
| 4 | 9 | 0.88 | 6.19 | 8 | 0.75 | 7.5 | 4.57 | 4.03 | 5.31 | 4.5 | 1.25 | 2.94 |
| 5 | 10 | 0.88 | 7.31 | 8 | 0.88 | 8.5 | 5.66 | 5.05 | 6.44 | 5.56 | 1.38 | 3.44 |
| 6 | 11 | 0.94 | 8.5 | 8 | 0.88 | 9.5 | 6.72 | 6.07 | 7.56 | 6.63 | 1.5 | 3.44 |
| 8 | 13.5 | 1.06 | 10.62 | 8 | 0.88 | 11.75 | 8.72 | 7.98 | 9.69 | 8.63 | 1.69 | 3.94 |
| 10 | 16 | 1.12 | 12.75 | 12 | 1 | 14.25 | 10.88 | 10.02 | 12 | 10.75 | 1.88 | 3.94 |
| 12 | 19 | 1.19 | 15 | 12 | 1 | 17 | 12.88 | 12 | 14.38 | 12.75 | 2.12 | 4.44 |
| 14 | 21 | 1.31 | 16.25 | 12 | 1.12 | 18.75 | 14.14 | 13.25 | 15.75 | 14 | 2.19 | 4.94 |
| 16 | 23.5 | 1.38 | 18.5 | 16 | 1.12 | 21.25 | 16.16 | 15.25 | 18 | 16 | 2.44 | 4.94 |
| 18 | 25 | 1.5 | 21 | 16 | 1.25 | 22.75 | 18.18 | 17.25 | 19.88 | 18 | 2.62 | 5.44 |
| 20 | 27.5 | 1.62 | 23 | 20 | 1.25 | 25 | 20.2 | 19.25 | 22 | 20 | 2.81 | 5.62 |
| 22 | 29.5 | 1.75 | 25.25 | 20 | 1.38 | 27.25 | 22.22 | 21.25 | 24.25 | 22 | 3.07 | 5.82 |
| 24 | 32 | 1.81 | 27.25 | 20 | 1.38 | 29.5 | 24.25 | 23.25 | 26.12 | 24 | 3.19 | 5.94 |
Copper Flanges Manufacturer and Supplier in Saudi Arabia :- Uses
These copper flanges have various important uses in industrial uses, which is to act as fasteners in a pipe-line system. Their applications extend to the sectors that include oil, chemicals, gas, HVAC systems, and water treatment. Adopted in use for sealing, corrosion and heat, these flanges are found useful in many services with demand in these qualities. These applications are: to connect the pipes; close gaps; hold the structure; and provide maintenance openings. Because of the adaptability and sturdiness of copper flanges, industries cannot afford to minimize their usage when it comes to operations’ effectiveness and safety.